Tippmann Accessories - X7

TECHT X7 FANG TRIGGER

• Minimize trigger travel with two adjustment screws
• Dual roller bearing design maximizes your rate of fire like never before.
• 100% Aluminum.
• The most durable, best feeling, and lets not forget BEST looking trigger for your X7.
• Compatible with all X7 frames.
• Compatible with the A5 HE Grip.

TECHT ZERO KICK HAMMER

The Zero Kick Hammer™ is most profound performance upgrade you will ever experience in a Tippmann or BT Marker. Using our patent pending MRT Technology™ we have reduced the internal moving mass of the bolt assembly by nearly half. Say goodbye to the clunky, kickin' like karate, hand-numbing, operation that you have come to expect from Tippmann style markers.

Works with: X7, A5, 98 Custom, 98 Original, Custom Pro Platinum, Bravo, Bravo Tactical, BT Delta and Delta Elite, and all BT4 models.

X7 E-Grip

• Magnetically activated trigger
• 20 balls per second
• Three position fire-selection switch so you can change your mode of fire on the fly.
• 5 firing modes: semi, full-auto, 3 shot burst, turbo, auto response.
• Easy to program.
• Weather proof design.
• Works only with the X7.

A.P.E. X7 Rampage Board

The Rampage board for the X7 is a direct Drop-In replacement for your existing E-Grip. No need to turn your board on or off, just use the selector switch to select the firing mode and go play! When you’re done for the day just switch your selector to the safety position. It’s that easy!

• Extended Battery Life
  
• Simple Push Button Selection to Change Firing Modes

• Reprogrammable Selector Switch (Position 1 AND 2!)
  
• Visual LED Mode Indicator – Visible in Direct Sunlight!
• 8 Base Firing Modes: • Semi Automatic • Burst • Reactive • TRUE Full Automatic • Turbo+• Rampage™• PSP3 • NXL
• User Programmable Firing Mode Enabler – You decide what modes are enabled or disabled
  
• Rate of Fire from 5 to 30bps!
  
• Adjustable Dwell and Debounce
  
• Programmable Burst Mode
  
• Programmable Rampage Mode
  
• Programmable Turbo+ Mode
  
• * Note - Users will have to make a minor modification to your grip to use this product. See the X7 users manual in the download section at www.goapeonline.com

X7 Low Profile Hopper

• Fits the X7 and the A5
• Low profile, offset design.
• Provides a clean view along top of marker.
• Much lower profile than the stock A5 hopper.

X7 2" Tactical Rail

• Fits the X7
• Allows you to attach accessories to your X7.
• Comes as pictured with 2 rails.

X7 Commando Gas Thru Stock

• Fits the X7
• Integrated high-pressure steel air line that seals directly to the marker's air system, allowing easy "plug and play" operation.
• Premium construction has ergonomic design and carved-out groove enhances the shooter's sightline.
• Has quick-disconnect air that is ideally angled.

Tippmann X7 X36 Folding Stock

• Fits the X7
• The X36 Folding Stock provides a stable mil-sim platform and enhances accuracy.
• Optimizes performance in tight, urban settings and is convenient and reliable in the field.

Tippmann X7 Double Trigger Kit

• Fits the X7
• Increase the speed you can pull the trigger on your X7.
• Ergonomic design helps prevent fatigue.

Tippmann X7 Carstock

• Fits the X7
• Offers 6 different postitions
• Easily adjustable during play
• High strength, weatherproof construction
• Ranges in length from 7 to 11 inches.

Tippmann X7 XP5SD Shroud

• Fits the X7
• Versatile, two-piece construction that allows you to run with two distinct Mil-Sim looks.
• The SD shroud can easily be "unlocked" and removed (or reattached) if desired.
• Also includes foregrip end cap.

Tippmann X7 X36 Carry Handle

• Fits the X7.
• Great looks and functionality.
• Sight peep hole and Weaver (Pcatinny) rail mount.
• Rail cutout accomodates hopper.
• Length at base: 12 inches.

Tippmann X7 M16 Carry Handle

• Fits the X7.
• Accurate Mil-Sim looks.
• Includes a sight peep hole.
• Constructed to withstand rugged woodsball play.
• Length at base: 7 inches

Tippmann X7 Response Trigger Kit

• Fits the X7
• Patented rapid air-assisted firing system that can shoot up to 15 BPS without batteries.
• An easy add on accessory that is a perfect match for the X7 Cyclone Feed System (sold seperately).

Tippmann X7 XP5 Curved Mag

• Fits the X7
• Made from a high-impact composite and is strong enough to be used as a grip.
• This features a push-button release and fits the XP5 Mag well (sold seperately - see below).

Tippmann X7 XP5 Mag Well

• Fits the X7
• XP5 Mag Well is needed to fit the smaller XP5 style magazines (see above).

Tippmann X7 M16 Xtra Short Mag

• Fits the X7
• Made from a virtually "unbreakable" composite material
• Realistic Mil-Sim design.
• Fits the X7 Mag well.

Tippmann X7 AK-47 Magazine

• Fits the X7
• Made from a high-impact composite and is strong enough to be used as a grip.
• Features a push-button release and fits the stock X7 Mag well.

Tippmann X7 M16 Front Sight

• Fits the X7
• Features a 1 inch bottom rail mount.
• Fits all standard Tippmann barrels and extends 2 inches above the barrel.

Tippmann X7 AK-47 Front Sight

• Fits the X7
• Features a 1 inch bottom rail mount and fits all standard Tippmann barrels.
• The sight extends 2 inches above the barrel and is built to withstand rugged woodsball play.

Tippmann X7 XP5 Foregrip

• Fits the X7
• Gives your X5 the look of the MP5.
• Glass-filled nylon composite construction.
• Accommodates a 2 inch bottom rail mount.
• Also includes a sight and end cap.
  

Tippmann X7 X36 Foregrip

• Fits the X7
• Accommodates up to six rail mounts
• Contains pre-molded rail slots
• Free-floating design (attaches firmly without set screws) and is built to last .

Tippmann X7 Vertical Foregrip

• Fits the X7
• Made of high impact composite material.
• Features include an adjustable placement on the weaver rail and a genuine mil-sim look.

Tippmann X7 M16 Foregrip

• Fits the X7
• The M16 Foregrip has great looks, functionality, and durability.
• Accommodates two rail mounts and has a free-floating design (attaches firmly without the use of set screws).

Tippmann X7 AK-47 Foregrip

• Fits the X7
• Genuine Mil-Sim looks and durability
• Free-floating design does not require set screws or compression rings that can damage your barrel
• Attaches easily and securely

Tippmann X7 Flatline Barrel

• Fits the X7
• Patented technology creates backspin for level and accurate shots.
• Designed for range and accuracy.
• Shoots up to 250 ft

TECHT Squsihy Paddle

• Made from a much softer rubber than the stock A5, X7, and 98 Cyclone paddles.
• Designed to help the cyclone feed eliminate ball breakage due to cold tempertures, brittle paint and high feed rates.
• These paddles are a must have for anyone using a cyclone loader.

Cyclone Feed QEPH

• Upgrade your A5, X7, and Custom 98 cyclone feed to shoot faster.
• Rapidly vents the blast of air that is used to advance the loader allowing the loader to respond instantly. This equates to faster loading with lower pressure.
• Smooth, teflon coated internal finish means better performance than stock piston housing.

Tac Cap

• The ultimate low profile feed for your A5, X7, 98 Cyclone, or Rip Clip!
• User sizeable - easily cuts down into three different heights, to accommodate either 30, 40, or 50 rounds.
• Plenty of clearance for optical sighting systems
• Perfect for Tactical Training or Scenario use.

A5 Vortex Mod

• Hard-coated aluminum internals that replace the stock plastic internals
• Feeds upwards to 25-26 balls per second at pressures as low as 200psi.
• Stock parts only feed at 15 BPS and only down to 400 psi.
• A must for A5 and X7 owners or Custom 98 owners with the Cyclone feed upgrade

A5 Lightening Rod

• Works in conjunction with the Vortex Mod to increase rate of fire and improve air efficiency on your A5 or X7.
• The secret to the performance gains is the sealed Swiss roller bearing located where the ratchet and piston rod meet.
• This is the next step in making your cyclone feed even faster and more efficient.

Orange Howtizer Bolt

• Fits the A5, X7 and the 98.
• Made from POM, a self-lubricating plastic that cannot scratch the inside of your gun.
• Internal oring seals the air between the powertube and the bolt resulting in better air efficiency.