Tippmann Accessories - A5

TECHT ZERO KICK HAMMER

The Zero Kick Hammer™ is most profound performance upgrade you will ever experience in a Tippmann or BT Marker. Using our patent pending MRT Technology™ we have reduced the internal moving mass of the bolt assembly by nearly half. Say goodbye to the clunky, kickin' like karate, hand-numbing, operation that you have come to expect from Tippmann style markers.

Works with: X7, A5, 98 Custom, 98 Original, Custom Pro Platinum, Bravo, Bravo Tactical, BT Delta and Delta Elite, and all BT4 models.

Tippmann A5 H.E. E-Grip Upgrade

• Three position external selector switch allows you to change modes on the fly.
  
• Magnetically activated hall-effect trigger lasts 7 times longer than physical switches
  
• 5 Firing modes with a rapid 20 balls per second firing
  
• Weatherproof
• Fits the Tippmann A5

A.P.E. Rampage Board - A5

• A direct Drop-In replacement for your existing E-Grip board.
  
• Extended Battery Life
• Simple Push Button Selection to Change Firing Modes
  
• Visual LED Mode Indicator – Visible in Direct Sunlight!
  
• 8 Base Firing Modes
• Rate of Fire from 5 to 30bps!
  
• Adjustable Dwell and Debounce
  
• Programmable Burst Mode
  
• Programmable Rampage Mode
  
• Programmable Turbo+ Mode

TECHT A5 Fang Trigger

• 100% Aircraft Grade Aluminum - Not Plastic, like all your other options!
  
• The Fang Trigger utilizes Dual-Roller Bearings, as well Multi-Point Micro Adjustments to make it the smoothest, fastest, and most adjustable trigger available.
• Our new Flexi-Double Trigger Guard is virtually unbreakable and provides much more room for your fingers.
  

Tac Cap

• The ultimate low profile feed for your A5, X7, 98 Cyclone, or Rip Clip!
• User sizeable - easily cuts down into three different heights, to accommodate either 30, 40, or 50 rounds.
• Plenty of clearance for optical sighting systems
• Perfect for Tactical Training or Scenario use.

Squishy Paddle

• Made from a much softer rubber than the stock A5, X7, Phenom, and 98 Cyclone paddles.
• Designed to help the cyclone feed eliminate ball breakage due to cold tempertures, brittle paint and high feed rates.
• These paddles are a must have for anyone using a cyclone loader.

Cyclone Feed QEPH

• Upgrade your A5, X7, and Custom 98 cyclone feed to shoot faster.
• Rapidly vents the blast of air that is used to advance the loader allowing the loader to respond instantly. This equates to faster loading with lower pressure.
• Smooth, teflon coated internal finish means better performance than stock piston housing.

LAPCO A5 M4 MAGAZINE

• The placement of this magazine is set closer to the trigger guard giving it the most authentic M4 Magazine look on the market.
• This magazine is made of a high grade polymer that will not weight you down yet maintains strength and toughness.
• We dare you to find a better quality A-5 magazine kit at this price point.

A5 Vortex Mod

• Hard-coated aluminum internals that replace the stock plastic internals
• Feeds upwards to 25-26 balls per second at pressures as low as 200psi.
• Stock parts only feed at 15 BPS and only down to 400 psi.
• A must for A5 and X7 owners or Custom 98 owners with the Cyclone feed upgrade

A5 Lightening Rod

• Works in conjunction with the Vortex Mod to increase rate of fire and improve air efficiency on your A5 or X7.
• The secret to the performance gains is the sealed Swiss roller bearing located where the ratchet and piston rod meet.
• This is the next step in making your cyclone feed even faster and more efficient.

Orange Howtizer Bolt

• Fits the A5, X7 and the 98.
• Made from POM, a self-lubricating plastic that cannot scratch the inside of your gun.
• Internal oring seals the air between the powertube and the bolt resulting in better air efficiency.

X7 Low Profile Hopper

• Fits the X7 and the A5
• Low profile, offset design.
• Provides a clean view along top of marker.
• Much lower profile than the stock A5 hopper.

Buy it on the X7 page - Click Here

Tippmann A5 Flat Top Rail

• Fits the A5
• Extremely low profile allows you to adapt nearly any weaver (picatinny) accessory to the top of your A5.
• Made from machined aluminum.
• 6 inches long.
• Slides over the A5's dovetail rail and secures with set screws (included).

Tippmann A5 MP5SD SHROUD

• Free floating design will not scar or damage your barrel.
• Overall length is 14" with a total of 10" added to gun.
• Glass-filled nylon composite construction.
• Easy to install. Bolts to gun body (long bolts included).

A5 MP Mag to Remote

• Efficient air-thru design
• Ideally positioned nipple allowing you to rapidly attach or detach the quick-disconnect end of your remote line.
• Built to withstand the demands of intense woodsball play.
• Anodized tombstone provides a perfect seal.

Our offset sight mount is perfect for mounting a scope and a flashlight, or any combination of things you may need. One rail is 3/8" and the other is a weaver mount with picatinny rails. Fits both Tippmann A-5 and Model-98.

BT Products offers the ultimate in tactical and milsim barrel systems for your Tippmann A5 Marker.

A5 Response Trigger Kit

• Pull the trigger and the auto response pushes the trigger back at twice the force. This gives it a bounce feel for ultra fast firing, up to 15 bps.
• For the Tippmann 98 Custom, or 98 Custom Pro. This will NOT fit on the regular Tippmann 98.

A5 Double Trigger Kit

• Ergonomic design helps prevent fatigue.
• Increases trigger speed.
• Easy to install.
• Fits the A5.

BT A5 Carstock

• 6 positions
  
• Angled butt plate
  
• Lighter weight plastic
  
• Eye loop for tactical shoulder strap
  
• Smaller than regular stocks
• Fits the A5 and the BT4.

BT A5 Saw Stock

• Dished out contour to offer more room for sighting with goggles, and flip up butt pad extension for added stability.
• Please note that the standard A-5 bottom line configuration will allow clearance for tanks up to the size of a 9 oz. CO2. Larger tanks require drop forward adapters or can be run with a remote.
• Fits the A5 and the BT4.

Tippmann A5 Flatline Barrel

• Tippmann Flatline™ Barrel System uses patented technology to create backspin for a level and precise shot. Increases range by 100 ft.
  
• Fits A5.

Custom Products A5 Bottomline Adapter

• This aluminum adapter block mounts on the bottom of the A-5 grip and allows you to attach a wide variety of drop forwards and bottomline adapters.