|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ion Paintball Gun Accessories
|
|
|
 |
|
|
|
ION XE Body Kit
- Change the color of your Ion XE.
- Lots of colors to chose from.
- Will not fit the basic Ion.
|
|
|
|
|
|
 |
VIRTUE EzOn 2.0
- Compatible with the Ion XE, EOS, Epiphany and Ion.
- Easier to use, looks better than ever.
- The 2.0 version comes with a tube of high strength industrial adhesive to prevent the button from slipping out of place.
|
|
|
|
|
|
 |
|
ION Firebolt
- Approx. half the weight of the stock bolt
- The Firebolt helps make your Ion or SP-8 faster, lighter and quieter
- Drops the operating pressure about 15 psi.
|
|
|
|
|
|
 |
ION L7 Bolt
- The L7 weights just 8.5 grams, making it the lightest bolt in paintball history.
- Teflon impregnated surface for less friction
- Allows for the lowest possible dwell settings and the highest rates of fire.
- It takes speed, accuracy and reduced kick to a level paintball has never seen.
|
|
|
|
|
|
|
 |
- Reduced friction and wear due to minimized bearing surface.
- Reduction in weight & size by 50% means almost no kick.
- Reduction of input pressure means remarkable higher efficiency .
- 3rd generation of Unicorn from the manufacturer with the most and longest experience in ION bolt upgrades.
|
|
|
|
|
|
 |
- Milsim-style body for the Ion.
- Comes with 2 45 degree Weaver rails for accessory mounting.
- Weaver rails are manufactured by OpsGear.
- Made from Aluminum.
|
|
|
|
|
|
|
|
 |
 |
- Connect a Virtue Dye Membrane Switch to the back of your Ion grip frame.
- Allows you to have an on/off and eye operation button on the back of your Ion grip frame just like a DM5 or Intimidator!
- Virtue Ion board (see below) & DM5 membrane switch required.
|
|
|
|
|
|
|
 |
|
Virtue ION EzOn
- Features an enlarged 3D dome bubble that makes turning your Ion on and off easier than ever.
- Actually depresses like a button when used with a Virtue Ion board, but also works with the stock Ion board as well.
- Still allows ION LED light to function.
|
|
|
|
|
|
 |
- The only Quick Exhaust Valve that swivels 360 degrees for installation at any angle.
- Increases cycle rates and shots per tank, while decreasing dwell and input pressure.
- Highly recommended upgrade for your Ion.
|
|
|
|
|
|
 |
The Blackheart circuit board is a full-featured tournament level, upgrade board. It gives you complete operational control and a wider range of adjustment for your ION.
Check out some of the great features of this board: Adjust the rate of fire up to 20 bps, non battery draining design, adjustable first shot drop software, PSP, NXL and Millenium modes, adjustable trigger debounce and more!
|
|
|
|
|
|
 |
Virtue ION BOARD
- The Virtue ION board easily installs in minutes, and will dramatically increase the performance of your gun.
- Simple trigger programming with 7 color LED, never open the grips again!
- Instant on. "Bam, it's on!" Just tap the on/off button and your Ion turns on right away. But you still have to hold the power button in for 1 seconds to turn it off to prevent you from accidently shutting off your gun during play.
- Enhanced processor for faster rates of fire
- Simple trigger programming
- 7 fully adjustable base modes, w/ thousands of ramp modes
- Fully adjustable, unlimited, Max Rate of Fire
|
|
|
|
|
|
- 15 BPS Ready
- Advanced Virtue Eye & Trigger Logic
- Adjustable debounce & mechanical bounce (AMB)
- Adjustable dwell, eye sensitivity, anti-bolt stick & more
- Adjustable Ramp Activation Speed and Ramp Percentage
- Low battery indicator and power efficient software
- Instant on with power saving 10 minute idle auto shutoff
|
|
 |
|
|
|
|
|
|
- Made from Delrin so you get less friction on the ball.
- Tension adjustable using the different strength springs enclosed.
|
|
|
|
|
 |
Virtue Ion Laser Eyes
- Virtue laser eyes are a complete replacement for the stock Ion eye board.
- Virtue lasers eyes use enhanced dual spectrum technology to scan both the infrared and visible light spectrums, taking ball detection technology to the next level.
- Instantly confirm whether or not your breakbeam eyes are functioning.
|
|
|
|
|
|
 |
|
|
|
|
|
|
Change the color of your Ion! Replace scratched or damaged bodies. 4 colors to choose from.
|
|
|
|
|
 |
|
|
|
- All Metal body kit for your ION!
- Lightweight, contoured alloy construction gives your Ion a whole new look without too much weight.
- Matching grip and regulator guard included. Available in Dynasty Blue, Pewter, Black and Silver.
|
|
|
|
|
 |
|
|
|
|
|
This will help increase the rate of fire on you new ION.
Full ball bearing pivot point. Smooth switch conatct point.
Adjustable magnet return.
|
|
|
|
|
 |
|
|
|
|
This will help increase the rate of fire on you new ION.
Full ball bearing pivot point. Smooth switch conatct point.
Adjustable magnet return.
|
|
|
|
|
 |
Critical ION RPM Trigger
- Dual Ball Bearing Pivot Point (using a ultra smooth high quality bearings)
- Ultra light weight design
- Ergonomically correct design
- Unique adjustable reverse polarity magnetic return using the included capacitor clip
- Rounded and smooth edges (fully radiused)
- Super smooth and very, very fast
- Four way adjustable trigger, magnet tension, switch activation point, rear travel stop, and trigger angle
- Includes the Critical Pro-Pin which replaces the stock dowel pin. Now trigger removal is a breeze. No more hammering or lost pins
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
 |
 |
|
|
|
|
|
 |
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|