The Cure2 Bolt comes fitted with the same bolt pin that is used on Ego8 and SL8r. The head of this pin sits lower to the body than previous pins, in order to fit in with the lower profile machining of the 08 model range. This lower pin head can cause an issue with some of the older models of Egos and Etek as the pin head can rub on the top of the body.

Problem Models:

• Etek Standard
• Ego5 Nexus
• Ego6 Standard
• Ego6 Nexus
• SL66
  

If you are purchasing a Cure2 bolt to use in a problem model then simply change the bolt pin to get the Cure2 bolt to function without any rubbing.