Dye Paintball Marker Accessories

• Remove your bolt-cap without tools with the Bloodline PMR Bolt Cap.
• Makes cleaning and maintaining your PMR easier.
• Made from Aluminum.
• Available in Black, Red, Blue.

• Replace your stock plastic back cap with this one made of aircraft grade aluminum.
• Vents 40% more air than the stock cap.
• Increases bolt cycle time allowing for more balls per second.

• A highly innovative combination of carbon fibre and an extremely durable aluminum alloy allows this bolt to weigh in at a mere 17.5 grams (0.6 ounce).
• The Advanced Airflow System optimizes the airflow in the bolt making it even more efficient.
• Choose DM5/DMC, DM6, Proto, or Proto M6.

Virute 07 Proto Laser Eyes - Virtue laser eyes are a complete replacement for the stock PM7 eyes. Virtue lasers eyes use enhanced dual spectrum technology operating on both the infrared and visible light spectrums, taking ball detection technology to the next level. Plus, with Virtue laser eyes, you can instantly confirm whether or not your breakbeam eyes are functioning.

• Enhanced eye operation
  
• Improved reliability
  
• Dual spectrum technology: Infrared and visible light
  
• Glowing laser eyes instantly confirms eye operation
  
• Compatible with stock board

Virute Proto Rail Laser Eyes - Virtue laser eyes are a complete replacement for the stock Rail eyes. Virtue lasers eyes use enhanced dual spectrum technology operating on both the infrared and visible light spectrums, taking ball detection technology to the next level. Plus, with Virtue laser eyes, you can instantly confirm whether or not your breakbeam eyes are functioning.

• Enhanced eye operation
  
• Improved reliability
  
• Dual spectrum technology: Infrared and visible light
  
• Glowing laser eyes instantly confirms eye operation
  
• Compatible with stock board

• Fits the DYE Ultralite 45 frame (DM6).

Virtue PM7/PM RAIL BOARD

• The Virtue PM7/RAIL board easily installs in minutes, and will dramatically increase the performance of your gun.
• Compatible with PM7 and Proto Rail
• Completely redesigned and updated components from the stock board. Not just a stock board loaded with new software.
• Simple trigger programming
  
• 7 fully adjustable base modes, w/ thousands of ramp modes
  
• Fully adjustable, unlimited, Max Rate of Fire
  
• 15 BPS Ready
  
• 100% tournament legal (NPPL, PSP, NXL, CFOA, Millennium)
  
• Advanced Virtue Eye & Trigger Logic
  
• Adjustable debounce & mechanical bounce (AMB)
  
• Adjustable dwell, eye sensitivity, anti-bolt stick & more
  
• Adjustable Ramp Activation Speed and Ramp Percentage
  
• Low battery indicator and power efficient software
  
• Forced shot
  
• Brighter multicolor LED
  
• Instant on with power saving 10 minute idle auto shutoff

Virtue DM6 BOARD

• The Virtue DM6 board easily installs in minutes, and will dramatically increase the performance of your gun.
• Enhanced processor for faster rates of fire
• Simple trigger programming
• 7 fully adjustable base modes, w/ thousands of ramp modes
• Fully adjustable, unlimited, Max Rate of Fire
• 15 BPS Ready
• Advanced Virtue Eye & Trigger Logic
• Adjustable debounce & mechanical bounce (AMB)
• Adjustable dwell, eye sensitivity, anti-bolt stick & more
• Adjustable Ramp Activation Speed and Ramp Percentage
• Low battery indicator and power efficient software
• Instant on with power saving 10 minute idle auto shutoff

Virtue PROTO BOARD

• The Virtue Proto board easily installs in minutes, and will dramatically increase the performance of your gun.
• Works in Proto 2005 and 2006
• Enhanced processor for faster rates of fire
• 7 fully adjustable base modes, w/ thousands of ramp modes
• Fully adjustable, unlimited, Max Rate of Fire
• 15 BPS Ready
• Advanced Virtue Eye & Trigger Logic
• Adjustable debounce & mechanical bounce (AMB)
• Adjustable dwell, eye sensitivity, anti-bolt stick & more
• Adjustable Ramp Activation Speed and Ramp Percentage
• Low battery indicator and power efficient software
• Instant on with power saving 10 minute idle auto shutoff

Virtue Membrane Switch

• Fits the DM4, DM5, and the DMC.
• Replaces your current on/off membrane switch

Virtue Membrane Switch

• Fits the DM4, DM5, and the DMC.
• Replaces your current on/off membrane switch

Virtue Membrane Switch

• Fits the DM4, DM5, and the DMC.
• Replaces your current on/off membrane switch

Virtue Membrane Switch

• Fits the DM4, DM5, and the DMC.
• Replaces your current on/off membrane switch

Critical Proto Trigger

• Fits the Proto PM5 and PM6
• Dual Ball Bearing Pivot Point (using ultra smooth high quality bearings)
• Ultra light weight design
• Ergonomically correct design
• Integrated adjustable reverse polarity magnetic return
• Rounded and smooth edges (fully radiused)
• Super smooth and very, very fast
• Includes the Critical Pro-Pin which replaces the stock dowel pin.
• Three way adjustable trigger, switch activation point, rear travel stop, and trigger angle

Critical Raze DM6 UL Trigger

• Fits the DM6 and DM4/DM5 UL frames
• Dual Ball Bearing Pivot Point (using ultra smooth high quality bearings)
• Ultra light weight design
• Ergonomically correct design
• Integrated adjustable reverse polarity magnetic return
• Rounded and smooth edges (fully radiused)
• Super smooth and very, very fast
• Four way adjustable trigger, magnet tension, switch activation point via the unique Critical Lever System, rear travel stop, and trigger angle

Critical Raze DM5 Trigger

• Fits the DM5 and DMC
• Dual Ball Bearing Pivot Point (using ultra smooth high quality bearings)
• Ultra light weight design
• Ergonomically correct design
• Integrated adjustable reverse polarity magnetic return
• Rounded and smooth edges (fully radiused)
• Super smooth and very, very fast
• Includes the Critical Pro-Pin which replaces the stock dowel pin.
• Four way adjustable trigger, magnet tension, switch activation point, rear travel stop, and trigger angle

Critical Pro-Pin

• Fits all DM and Proto markers
• Replaces the stock dowel pin. Now trigger removal is a breeze. No more hammering. No more loose or lost pins.
• Precision machined from stainless steel.
• Designed to work with stock triggers as well as aftermarket ball bearing triggers.
• Just pull your stock dowel pin out and replace it with the Pro-Pin. The button head screw tightens down onto the supplied o-ring to prevent it from loosening. It is that simple.

Fits the DM4, DM5, and Proto Markers