DART Bolt - The Ego11 DART Bolt incorporates the latest Cure4 cushioned tip
design as seen on the CSL.
In addition to the Cure4 design there
are now 2 seals on the body of the bolt, one either side of the transfer port.
Rather than use the traditional method of stretched, incorrectly sized o-rings
as the seals, the DART bolt utilizes a floating seal design. These floating
seals match the internal bore of the breech to create a perfect seal, yet allow
for thermal expansion and contraction of the bolt body to occur without worry
of increasing frictional drag in the bolt system or loss of effective seal. The
floating seals provide the optimum compromise between reliability and efficiency.
They will operate with next-to-no lubrication in even the harshest conditions
without any negative effects to efficiency or consistency.
Finally the new DART Bolt is fitted with
a weighted insert. The small increase in mass that this insert brings to the
bolt system enables the Ego11 to cycle with a lower LPR pressure at lower
cyclic speeds yet still retain enough inertia to pop the exhaust valve open and
overcome blowback forces during the firing phase.
DART Valve System - The Ego11 DART Valve Assembly combines an improved flow path with
refined dynamics that result in significant gains in efficiency. The new design
forces the valve to close off more quickly after opening, reducing air wastage
after the ball has reached velocity.
The Ego11 DART Kit is designed to be
used only with the Ego11 platform (Includes CSL) and is only to be used as a
complete kit. Installation and use of an incomplete kit will seriously affect
the performance of the marker and in extreme cases may lead to damage of the
marker. Only use the DART Valve Assembly and DART Bolt together in your EGO11
or CSL Marker.
Ego11 DART Kit Contains:
1 x DART Bolt Assembly (without pin)
1 x DART Valve Guide
1 x DART Exhaust Valve
Spare Bolt Plunger and Spring
Instruction Sheet
